Tap a name to type it, then tap the value beside it to add the live value. Backspace removes a whole value.
These take turns on the board. Anything sent by hand, and any scheduled message or reminder, shows on top and the rotation carries on afterwards, starting the interrupted item's time again.
Touch and hold a category to move it up or down.
Every Burnt colour is worked out from this one colour. Bright colours work best.
How much colour there is. Lower fades it towards grey.
Below 100% the colour is darker; above 100% it is lighter.
How much of the colour shows in the Burnt backgrounds. Buttons and text keep theirs.
The page changes as you slide.
How long the Mintyboard name and version show when the page opens. 0 turns it off.
Off: a black background. You'll see either change next time the page opens.
Themes you add here can be chosen for this page.
Choose a Home Assistant theme file (.yaml, as downloaded from a HACS theme's page) or a Minty theme file (.json). Its colours, corner rounding and typeface are carried over. Special effects that rely on Home Assistant add-ons are not.
Files can also be put straight into the folder data\themes on the computer this runs on, then press Look again.
A dial drawn as an SVG file in the Minty dial format becomes one more style under Dial when you edit a tile.
Files can also be put straight into the folder data\graphics.
The board's own styles (columns, rows, diagonal and the rest) are run by the board and are always safe. The step-by-step styles are Mintyserver sending the board a series of messages: they are experimental, and Vestaboard only support about one message every 15 seconds. If steps are sent faster than the board can turn, the board keeps room for only one waiting message and does not report an error when it replaces it, so with a short gap some of the in-between steps are skipped and the board jumps on to the latest one. The final message always arrives. Whether very short gaps cause extra wear on the flaps has not been confirmed by Vestaboard.
Built-in designs you deleted on the Designs tab can be brought back here.
In the design builder, tapping a value's name types that name. Give a name a nickname and the builder types the nickname instead.
A message sent with "Display for: Fixed" stays up until something replaces it, holding back the rotation. This removes it so the rotation and schedules carry on.
Mintykiosk is the dashboard page for a tablet or any screen that is always on. It uses the same readings as the Mintyboard.
Choose a look to dress the kiosk differently from the Mintyboard page. The Mintyboard page's own theme is under Settings, Themes.
The picture Mintykiosk has on a home screen and on its browser tab. A kiosk that is already on a tablet's home screen may keep its old picture until you take it off the home screen and add it again.
The size of the name at the top of every tile. You can also give one tile its own title size when you edit it.
More sizes lets a tile be made exactly as big as what is in it. Tiles of odd sizes leave more gaps between them; Smart arrange (in the kiosk's arrange mode) closes up what it can.
At any hour. A touch brings the kiosk straight back, and that first touch presses nothing.
In a quiet period the kiosk stays dark, showing only the time, and goes dark again a minute after it is touched. The Mintyboard needs a quiet period because it is noisy; the kiosk is silent, so this is only about light in the room.
Opening a tile fetches a fresh reading for it. This limit stops opening and closing a tile from pestering Spotify, Evohome, the Powerwall, the weather and football, on however many tablets. Evohome is never asked more than once in 3 minutes whatever is set here. Lights, plugs and air conditioners are on your home network and are asked every time. A car is only asked by the Refresh button on its tile.
Nothing can be changed from the kiosk until you tick it here. Anyone who can open the kiosk can then change that device.
Then the room goes back to its schedule by itself.
The last 10 different messages sent by hand. Send one again, or open it in Compose to change it first.
Which Vestaboard you have. A change here takes effect the next time Mintyboard restarts - it won't resize the live board until then.
During this time the board shows an "asleep" message and holds back everything except urgent items. Afterwards, the wake message below shows until something else is due (or, if it's blank, the asleep message just stays up until then).
To make it sleep right now for a while - the same way, but for however long you choose, and ending on its own without changing anything below - use this, or say "Alexa, tell Minty Board to sleep for 30 minutes" (or "wake up" to end it early).
Leave all three lines empty for no wake message.
The location, units and how often it updates are set on the computer running Mintyboard with set-weather-location.bat . Add a rotation item that shows it on the Rotation tab.
Choose up to three competitions. Tick "only teams I follow" for a competition where you only want the matches your teams are in (for example the Champions League, for Arsenal).
Their live scores show in their own rotation item, whichever of the free competitions they are playing in (not the FA Cup, Carabao Cup, Europa or Conference League - the free football data doesn't cover those). They also come first on each competition's calm screen.
Get a free API token at football-data.org. Leave the token box blank to keep the one already saved.
The Tesla login itself is done once on the computer running Mintyboard, with set-powerwall.bat. Then add a rotation item that shows it on the Rotation tab, or put {battery} into a scheduled message.
This asks Tesla one extra question each time the battery is checked. It is what draws the power flow picture on the kiosk's battery tile.
The TCC login itself is done once on the computer running Mintyboard, with set-evohome.bat. Then add a rotation item on the Rotation tab to show room temperatures or hot water, or use {room:Name} / {dhw} in a scheduled message.
Pick which rooms appear in the rotation's "room temperatures" item, and the order they page through. A single room can still be requested any time by voice ("Alexa, tell Minty Board to show the temperature in the kitchen") without being on this list.
Each car's connected-services login is done once on the computer running Mintyboard, with set-cars.bat (it also asks for the password/PIN, so they aren't typed here). Polling is deliberately very conservative - once a day automatically, plus a few on-demand checks at most - to avoid waking either car's own systems. Add a rotation item that shows both cars here on the Rotation tab, or use {car:lexus} / {car:fiat} in a scheduled message.
Each air conditioner is read over your local network only - no cloud account of any kind. You need its local IP address (give it a reserved/static address in your router, the same way the board itself has one) and its "device ID" (its MAC address with no colons - find it the same way in your router's device list, or in the WiFi network name it broadcasts during its own first-time setup, "AP-WH3X-..."). Add rotation items on the Rotation tab: one air conditioner at a time, or all of them paging through in turn. Use {ac:Name} in a scheduled message for one unit's indoor temperature.
The one-time Spotify sign-in is done once on the computer running Mintyboard, with set-spotify.bat. Then say "Alexa, tell Minty Board to show the music", or use "Show music now" on the Send tab.
Philips Hue lights, read from the Hue Bridge on your home network. They appear on Mintykiosk as the Lights tile.
To set it up, run set-hue.bat on the computer running Mintyserver (press the bridge's round button when asked), then restart Mintyserver. check-hue.bat shows what it can see. Whether the kiosk may switch lights is in Mintykiosk settings.
TP-Link Kasa plugs, read directly over your home network. They appear on Mintykiosk as the Plugs tile.
To set it up, run set-kasa.bat on the computer running Mintyserver, then restart Mintyserver. check-kasa.bat shows what it can see. Whether the kiosk may switch plugs is in Mintykiosk settings.
Homematic IP garage door modules, read through eQ-3's Homematic IP cloud (the access point has no other way in). They appear on Mintykiosk as the Garage tile: open, closed or part-way, and whether a door is moving.
To set it up, run set-homematic.bat on the computer running Mintyserver. It asks for the number on the back of the access point (the SGTIN) and for one press of the access point's blue button, then restart Mintyserver. check-homematic.bat shows what it can see.
Opening and closing from the kiosk is off until you tick Garage doors in Mintykiosk settings. Once ticked, anyone who can open the kiosk can open the garage, from anywhere the kiosk can be reached.
Ring cameras and doorbells. They appear on Mintykiosk as the Cameras tile: a still picture from each, and one live picture at a time, with sound. Ring publish no way in for other software, so Mintyserver reaches their service the way Ring's own app does; Ring could change it and break this without notice. Everything goes through Ring's service on the internet: nothing is read from the cameras directly.
To set it up, run update-libraries.bat once, then set-ring.bat, on the computer running Mintyserver. It asks for a Ring account's email and password and the verification code Ring send, then restart Mintyserver. The password is used once and not kept. It is best to sign in as a shared user made for Mintyserver, not as the account's owner. check-ring.bat shows what it can see.
No picture is shown on the kiosk until you tick Cameras in Mintykiosk settings. Once ticked, anyone who can open the kiosk can see and hear the cameras, from anywhere the kiosk can be reached.
The live picture travels straight from Ring to the tablet, not through this computer. It stops by itself after five minutes, or when its tile is closed. A battery camera uses its battery while it is watched.
The level of the FTSE 100, FTSE 250, Nasdaq and Dow Jones, and how far each is up or down on the day. They appear on Mintykiosk as the Markets tile, and as the Markets design for the Mintyboard.
The figures come from Yahoo Finance, with no account or key. Yahoo do not offer this for other software, so it could stop working without notice. London's figures are about 15 minutes behind. They are for interest, not for dealing.
A photograph of a dog, a different one every so often, from dog.ceo (free, with no account). It appears on Mintykiosk as the Dog tile, with an Another dog button, and the Dog design shows its breed on the Mintyboard.
Your own dog pictures, one a day, from the Dogs folder beside the Mintyboard folder (videos and other files are ignored, and the pictures are never changed). Each picture is cropped so the dog stays in the tile. A little banner says "More pictures needed!" when only 5 never-shown pictures are left; when all have been shown, they are shown again until new ones are added. It appears on Mintykiosk as the My dogs tile, which can be renamed.
The latest Arsenal headlines from BBC Sport, with a sentence about each story. They appear on Mintykiosk as the News tile, and the News design puts the newest headline on the Mintyboard.
The headlines come from BBC Sport's news feed for Arsenal, which the BBC publish for anyone to read. Another club's or subject's feed can be put in the settings file instead, or as well (see the README).
Follow one flight now and then: where it is from and to, its times, gate and baggage belt, whether it is late, and where it is while in the air. It appears on Mintykiosk as the Flight tile, and as the Flight design for the Mintyboard. Nothing is asked until you start tracking, and tracking ends by itself when the flight lands.
Flights are looked up with Aviationstack's free plan, which allows 100 requests a month. Each check is one request, and so is each press of Update now. The timed checks stop at 90 in a month, leaving the rest for Update now.
To set it up, sign up for a free key at aviationstack.com, then run set-flight.bat on the computer running Mintyserver and restart Mintyserver. check-flight.bat shows what it holds.
How much electricity the house has used from the grid, half hour by half hour, from your smart meter through your E.ON Next account. It appears on Mintykiosk as the Electricity used tile, whose page has graphs of the last 24 hours, 48 hours and week, and as the Electricity design for the Mintyboard.
The meter sends its readings to E.ON about once a day, usually overnight, so the newest are from last night or the night before. Asking more often than every few hours finds nothing new.
To set it up, run set-eon.bat on the computer running Mintyserver: it asks for the email address and password you use for the E.ON Next website or app, finds your account and electricity meter, and keeps the password in Mintyserver's secret store. Then restart Mintyserver. check-eon.bat shows what it holds.
Create the custom skill in the Amazon developer console (see the README), then paste its skill ID here so Mintyboard can check that a request claiming to be Alexa really is. The endpoint also needs to be reachable from the internet.
A token lets another program (a script, for example) send messages without your password. Give each thing its own token so you can switch one off later. Alexa does not need one - it proves itself with its own signed requests instead; set its skill ID on the Settings tab.
Leave the day empty for today (or tomorrow if the time has gone).